华为3026交换机流量监控配置单

更新时间：2007年09月19日 10:20:15 作者：

注明：此交换机为华为3026系列交换机，做流量监控的必须配置要求 <Quidway>display current-configuration 【显示交换机配置信息】
#
sy sname Quidway
#
radius scheme system
server-type huawei
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domaindomain system
radius-scheme system
access-limit disable
state active
vlan-assignment-mode integer
idle-cut disable
self-service-url disable
messenger time disable domain default enable system
#
local-server nas-ip 127.0.0.1 key huawei
#
temperature-limit 0 42 65
#
am enable   【这里要开启】
#
vlan 1
#
interface Vlan-interface1      【设置交换机IP】
ip address 交换机VLAN1IP 掩码地址#
interface Aux0/0
#
interface Ethernet0/1          【这里设置1口为出入口】
#
interface Ethernet0/2           【以下2－24口彼此都做隔离】
am isolate Ethernet0/3 to Ethernet0/24
#
interface Ethernet0/3
am isolate Ethernet0/2 Ethernet0/4 to Ethernet0/24
#
interface Ethernet0/4
am isolate Ethernet0/2 to Ethernet0/3 Ethernet0/5 to Ethernet0/24
#
interface Ethernet0/5
am isolate Ethernet0/2 to Ethernet0/4 Ethernet0/6 to Ethernet0/24
#
interface Ethernet0/6
am isolate Ethernet0/2 to Ethernet0/5 Ethernet0/7 to Ethernet0/24
#
interface Ethernet0/7
am isolate Ethernet0/2 to Ethernet0/6 Ethernet0/8 to Ethernet0/24
#
interface Ethernet0/8
am isolate Ethernet0/2 to Ethernet0/7 Ethernet0/9 to Ethernet0/24
#
interface Ethernet0/9
am isolate Ethernet0/2 to Ethernet0/8 Ethernet0/10 to Ethernet0/24
#
interface Ethernet0/10
am isolate Ethernet0/2 to Ethernet0/9 Ethernet0/11 to Ethernet0/24
#
interface Ethernet0/11
am isolate Ethernet0/2 to Ethernet0/10 Ethernet0/12 to Ethernet0/24
#
interface Ethernet0/12
am isolate Ethernet0/2 to Ethernet0/11 Ethernet0/13 to Ethernet0/24
#
interface Ethernet0/13
am isolate Ethernet0/2 to Ethernet0/12 Ethernet0/14 to Ethernet0/24
#
interface Ethernet0/14
am isolate Ethernet0/2 to Ethernet0/13 Ethernet0/15 to Ethernet0/24
#
interface Ethernet0/15
am isolate Ethernet0/2 to Ethernet0/14 Ethernet0/16 to Ethernet0/24
#
interface Ethernet0/16
am isolate Ethernet0/2 to Ethernet0/15 Ethernet0/17 to Ethernet0/24
#
interface Ethernet0/17
am isolate Ethernet0/2 to Ethernet0/16 Ethernet0/18 to Ethernet0/24
#
interface Ethernet0/18
am isolate Ethernet0/2 to Ethernet0/17 Ethernet0/19 to Ethernet0/24
#
interface Ethernet0/19
am isolate Ethernet0/2 to Ethernet0/18 Ethernet0/20 to Ethernet0/24
#
interface Ethernet0/20
am isolate Ethernet0/2 to Ethernet0/19 Ethernet0/21 to Ethernet0/24
#
interface Ethernet0/21
am isolate Ethernet0/2 to Ethernet0/20 Ethernet0/22 to Ethernet0/24
#
interface Ethernet0/22
am isolate Ethernet0/2 to Ethernet0/21 Ethernet0/23 to Ethernet0/24
#
interface Ethernet0/23
am isolate Ethernet0/2 to Ethernet0/22 Ethernet0/24
#
interface Ethernet0/24
am isolate Ethernet0/2 to Ethernet0/23
#
interface NULL0
# 【设置交换机网络关】
ip route-static 0.0.0.0 0.0.0.0 网关IP preference 60
#  【开启SNMP协议】
snmp-agent
snmp-agent local-engineid 800007DB000FE20183BF6877
snmp-agent community write private
snmp-agent community read olylinux 【设置public信息,可随意名称】
snmp-agent sys-info contact xxxx@126.com
snmp-agent sys-info location BeiJing China
snmp-agent sys-info version all
snmp-agent trap enable standard
snmp-agent trap enable configuration
#
user-interface aux 0
user-interface vty 0 4     【设置远程登陆密码】
user privilege level 3
set authentication password simple 远程登陆密码
#
return 如何删除不用的规则1.删除交换机VLAN1IPinterface Vlan-interface1   【先进入】undo  ip address             2.删除网关undo route-static3.删除snmpundo snmp-agent4.删除相应的publicundo snmp-agent community olylinux 【删除了olylinux标识】5.保存配置退出管理模式,输入 save 按 y 即可文章录入：csh    责任编辑：csh