Python自动生成代码 使用tkinter图形化操作并生成代码框架

#conding=utf-8

from FileHandler import WritetoFile
import sys

PwdPath = sys.argv[0]

class BuildCode_Dev:
 'Auto Generate code of Device control'

 def __init__(self, KeyWord = 'TestDemoCommand'):
  self.CmdKeyWord = KeyWord

 def Generate(self):
  fileName = 'Code_Dev.txt'

  mycode = [] 
 #想生成什么样的代码就在mycode中append相应的行，
  mycode.append('\n---------------------- Demo code Below: ---------------------- ')

  mycode.append('\n---------------------- Demo code Below: ---------------------- ') 

  mycode.append('\n---------------------- Demo code Below: ---------------------- ')
  mycode.append('\n***** DemoCode_Get_DataLength() ***** ')
  mycode.append('\n***** DemoCode_Set_DataLength() ***** ')

  mycode.append('Switch ('+ self.CmdKeyWord + '):')
  mycode.append(' case('+ self.CmdKeyWord + '):') 
  mycode.append(' break;')


  WritetoFile(fileName,mycode)

  print('Code:'+self.CmdKeyWord + ' Generator OK!')

  return(mycode)


if __name__ == '__main__':
 if(sys.argv[1:] == []):
  print('Not input parameter , Use Test Data')
  CmdKeyWord = 'TestDemoCommand'
 else:
  CmdKeyWord = sys.argv[1]
  
 
#code = BuildCode_Dev(CmdKeyWord)
#code.Generate()


#print(PwdPath)
#print(CmdKeyWord)

# -*- coding: utf-8 -*-
from tkinter import *
from GatewayControl_CodeGenerator import *
from DeviceControl_CodeGenerator import *


def GWMsg():
  txt.delete(1.0,END)
  Input = str(inputData.get(1.0,END))
  
  Cmd_Gw = BuildCode_GW(Input)
  CodeRst = Cmd_Gw.Generate()
  s = 'Code_GW.txt Generate Success:\n\n'
  txt.insert(END, s)
  txt.insert(END, CodeRst) 
  #inputData.delete(0.0, END) 

def DevMsg():
  txt.delete(1.0,END)
  Input = str(inputData.get(1.0,END))
  
  Cmd_Dev = BuildCode_Dev(Input)
  CodeRst = Cmd_Dev.Generate()
  s = 'Code_Dev.txt Generate Success:\n\n'
  txt.insert(END, s)
  txt.insert(END, CodeRst) 
  #inputData.delete(0.0, END) 

def clearContent():
  inputData.delete(1.0, END) 
  txt.delete(1.0,END)


root = Tk()
root.geometry('1000x600')
root.title(' Code Generator')
root.config(bg='#f0ffff')

#Lable
intro = Label(root,text='请在左侧输入消息/命令名字, 然后选择相应按钮生成代码',\
      bg='#d3fbfb',\
      fg='red',\
      font=('华文新魏',11),\
      width=20,\
      height=2,\
      relief=RIDGE)

intro.place(relx=0.1, rely=0.1, relwidth=0.8, relheight=0.1)

#Input
inputData = Text(root, font = ('',14))
inputData.place(relx=0.1, rely=0.2, relwidth=0.3, relheight=0.6)

#Output
txt = Text(root, font = ('',9))
txt.place(relx=0.6, rely=0.2, relwidth=0.3, relheight=0.6)

#Button 
bt_json2bin = Button(root, text='**Demo Control', command=GWMsg, fg ='blue')
bt_json2bin.place(relx=0.4, rely=0.25, relwidth=0.2, relheight=0.1)

bt_bin2json = Button(root, text='**Demo Control', command=DevMsg, fg ='blue')
bt_bin2json.place(relx=0.4, rely=0.45, relwidth=0.2, relheight=0.1)

bt_clear = Button(root, text='Clear', command=clearContent, fg ='blue')
bt_clear.place(relx=0.4, rely=0.65, relwidth=0.2, relheight=0.1)

intro = Label(root,text='产生的完整代码在 Code_GW.txt或Code_Dev.txt中(当前目录 ), 问题联系人：Howard',\
      bg='#d3fbfb',\
      fg='red',\
      font=('华文新魏',11),\
      width=20,\
      height=2,\
      relief=RIDGE)

intro.place(relx=0.1, rely=0.8, relwidth=0.8, relheight=0.1)

root.mainloop()

def WritetoFile(FileName,Data):
 with open(FileName,'w') as record:
  strr = "\n"
  content = strr.join(Data)
  record.write(content+'\n')