Docker部署FastDFS的实现方法

docker network ls # 网络列表 

docker network create --driver bridge --subnet=192.168.127.0/24 fastdfs_fastdfs_net # 创建自定义网段 暂不使用

docker pull season/fastdfs

## 部署流程采用bridge网络 
docker run -ti -d --name trakcer -v /f/fastdfs/tracker_data:/fastdfs/tracker/data -p 22122:22122 season/fastdfs tracker

## 172.17.0.2为容器的ip地址
docker run -tid --name storage -v /f/fastdfs/storage_data:/fastdfs/storage/data -v /f/fastdfs/store_path:/fastdfs/store_path -p 8080:8080 -p 23000:23000 -p 80:80 -e TRACKER_SERVER:172.17.0.2:22122 -e GROUP_NAME=group1 season/fastdfs storage

### 进行服务的配置,进入storage容器，到storage的配置文件中配置http访问的端口，配置文件在fdfs_conf目录下的storage.conf
docker exec -it storage bash
cd fdfs_conf
more storage.conf

docker cp storage:/fdfs_conf/storage.conf ./

docker cp ./storage.conf storage:/fdfs_conf/

docker stop storage
docker start storage

docker exec -it storage bash
cd fdfs_conf
fdfs_monitor storage.conf

## 开启一个客户端
docker cp ./storage.conf fdfs_sh:/fdfs_conf/

docker exec -it fdfs_sh bash

docker exec -it fdfs_sh bash
echo hello>a.txt

cd fdfs_conf

fdfs_upload_file storage.conf /a.txt

netstat -aon|findstr "22122" # 查看端口是否禁用
netsh firewall set opmode mode=disable # 关闭防火墙
netsh firewall reset 

docker-machine ssh default
sudo sed -i "s|EXTRA_ARGS='|EXTRA_ARGS='--registry-mirror=http://hub-mirror.c.163.com |g" /var/lib/boot2docker/profile
exit
docke-machine restart default

#FastDFS
fdfs:
  so-timeout: 1501
  connect-timeout: 601
  thumb-image:       #缩略图生成参数
    width: 200
    height: 200
  tracker-list:
    - 192.168.118.162:22122

## 添加路由
route -p add 172.17.0.0 MASK 255.255.255.0 10.0.75.2

## 该镜像是集成Nginx的镜像
git clone https://qbanxiaoli@github.com/qbanxiaoli/fastdfs.git 

cd fastdfs

shellversion: '3.0'
services:
 fastdfs:
  build: .
  image: qbanxiaoli/fastdfs
  # 该容器是否需要开机启动+自动重启。若需要，则取消注释。
  restart: always
  container_name: fastdfs
  ports:
   - 8080:8080
   - 22122:22122
   - 23000:23000
  environment:
   # 使用东八区的时间
   TZ: Asia/Shanghai
   # nginx服务端口,默认8080端口，可修改
   WEB_PORT: 8080
   # tracker_server服务端口，默认22122端口，可修改
   FDFS_PORT: 22122
   # fastdht服务端口，默认11411端口，可修改
   FDHT_PORT: 11411
   # docker所在宿主机IP内网地址，默认使用eth0网卡的地址
   IP: 192.168.118.93
  volumes:
   # 将本地目录映射到docker容器内的fastdfs数据存储目录，将fastdfs文件存储到主机上，以免每次重建docker容器，之前存储的文件就丢失了。
   - /e/fastdfs/fastdfs:/var/local
  # 由于windows和unix识别不了host网络，目前需要新建网段，强制指定容器ip与宿主机ip一致
  networks:
   fastdfs_net:
    ipv4_address: 192.168.118.93

networks:
 fastdfs_net:
  driver: bridge
  driver_opts:
   parent: eth0
  ipam:
   config:
    - subnet: 192.168.118.0/24

shelldocker-compose up -d

# 进入容器内部
docker exec -it fastdfs /bin/bash

shell/usr/bin/fdfs_trackerd /etc/fdfs/tracker.conf restart

shell/usr/bin/fdfs_storaged /etc/fdfs/storage.conf restart

shellfdfs_monitor /etc/fdfs/client.conf