脚本之家 服务器常用软件
快捷导航
您的位置：首页 → 软件编程 → Android → 利用OPENCV为android开发畸变校正的JNI库

利用OPENCV为android开发畸变校正的JNI库方法

 更新时间：2018年08月04日 14:31:48   作者：残诗  
今天小编就为大家分享一篇利用OPENCV为android开发畸变校正的JNI库方法，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧

需要为项目提供一套畸变校正的算法，由于需要大量的矩阵运算，考虑到效率和适时性，使用JNI开发，希望把有关数组短阵的处理的变换全部放入C语言中处理。

主要用于android移动端，大致的数据来源一是从camera直接读取YUV数据，一种是从第三方接读取RGB数据，另一种是直接对BITMAP进行处理。

1.考虑到硬件设备接口，第三方软件接口，图像接口，OPENCV接口，希望能够开发出通用的算法库，一劳永逸的解决各种复杂的使用场景，因此数据要支持YUV，支持ARGB，支持MAT

2android对BITMAP有获取像素点的操作，也有通过象素点生成BITMAP的操作，而且有很多图像处理接口和第三方可以处理RGB矩阵，如

bm.getPixels(pixs, 0, w, 0, 0, w, h);
int[] pixs1 = new int[w*h]; 
    final Bitmap bm2 = Bitmap.createBitmap(pixs1, w, h, Bitmap.Config.ARGB_8888);

因此设计如下接口，入口为ARGB的整型，输出也是整型

public static native boolean RgbaUndistort(int[] argb, int width, int height, int[] pixels);

3考虑到有些情况需要二维数组，

public static native boolean RgbaUndistort2(int[][] rgb, int width, int height, int[] pixels);

4考虑到OPENCV的MAT结构，由于MAT有matToBitmap可以直接转化为BITMAP，应用MAT 提供

public static native boolean RgbaUndistortMat(int[] argb, int width, int height, long pArgbOutMatAddr);

5考虑到第三方使用MAT的情况，因此输入也可以支持MAT因此设计接口

public static native boolean RgbMatUndistortMat(long pArgbMatAddr, int width, int height, long pArgbOutMatAddr);

6考虑到摄像头输出YUV，提供YUV数据处理， 一个输出RGB， 一个输出MAT

public static native boolean YuvNv21UndistortRgba(byte[] YuvNv21, int width, int height, int[] pixels);
public static native boolean YuvNv21UndistortRgbaMat(byte[] YuvNv21, int width, int height, long pMatAddr);

7考虑到可能有不需要畸变的场合，为YUV设计一个灰度，一个RGB接口

public static native boolean YuvNv21ToGray(byte[] YuvNv21,int width, int height, int[] pixels);
public static native boolean YuvNv21ToRGBA(byte[] YuvNv21, int width, int height, int[] pixels);

8于是编写简单的JAVA头源生类

public class ImageProc3 {
	static {
		System.loadLibrary("ImgProc3");
	}
	
	public static native boolean YuvNv21ToGray(byte[] YuvNv21,int width, int height, int[] pixels);
	public static native boolean YuvNv21ToRGBA(byte[] YuvNv21, int width, int height, int[] pixels);
	
	
	public static native boolean RgbaUndistort(int[] argb, int width, int height, int[] pixels);
	public static native boolean RgbaUndistort2(int[][] rgb, int width, int height, int[] pixels);
	public static native boolean RgbaUndistortMat(int[] argb, int width, int height, long pArgbOutMatAddr);
	public static native boolean RgbMatUndistortMat(long pArgbMatAddr, int width, int height, long pArgbOutMatAddr);
	
	public static native boolean YuvNv21UndistortRgba(byte[] YuvNv21, int width, int height, int[] pixels);
	public static native boolean YuvNv21UndistortRgbaMat(byte[] YuvNv21, int width, int height, long pMatAddr);
 
}

进入BIN目录的classes文件夹使用java -classpath . -jni 生成C头文件

根据头文件编写实现的C代码

#include <stdio.h>
#include <jni.h>
#include<Android/log.h>
 
 
#include <opencv2/core/core.hpp>
#include <opencv2/highgui/highgui.hpp>
#include <opencv2/imgproc/imgproc.hpp>
 
 
using namespace std;
using namespace cv;
 
 
#define TAG  "Camera XXXXX" // 锟斤拷锟斤拷锟斤拷远锟斤拷锟斤拷LOG锟侥憋拷识
#define LOGD(...) __android_log_print(ANDROID_LOG_DEBUG,TAG,__VA_ARGS__) // 锟斤拷锟斤拷LOGD锟斤拷锟斤拷
 
 
#ifdef __cplusplus
extern "C" {
#endif
/*
 * Class:   ImgProc_ImageProc3
 * Method:  YuvNv21ToGray
 * Signature: ([BII[I)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_YuvNv21ToGray
 (JNIEnv *jenv, jclass jclassz, jbyteArray YuvNv21, jint width, jint height, jintArray pixels){
 
 
	jbyte * pNV21FrameData = jenv->GetByteArrayElements(YuvNv21, 0);
	jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
 
 
	Mat mNV(height, width, CV_8UC1, (unsigned char*) pNV21FrameData);
	Mat mBgra(height, width, CV_8UC4, (unsigned char*) poutPixels);
 
 
	cvtColor(mNV, mBgra, CV_YUV420sp2RGBA);
 
 
	jenv->ReleaseByteArrayElements(YuvNv21, pNV21FrameData, 0);
	jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
  return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  YuvNv21ToRGBA
 * Signature: ([BII[I)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_YuvNv21ToRGBA
 (JNIEnv *jenv, jclass jclassz, jbyteArray YuvNv21, jint width, jint height, jintArray pixels){
	jbyte * pBuf = (jbyte*) jenv->GetByteArrayElements(YuvNv21, 0);
	jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
 
 
	Mat image(height + height / 2, width, CV_8UC1, (unsigned char *) pBuf);
	Mat rgba(height, width, CV_8UC4, (unsigned char*) poutPixels);
	Mat tmp(height, width, CV_8UC4);
	cvtColor(image, tmp, CV_YUV420sp2RGBA);
 
 
	vector <Mat> channels;
	split(tmp, channels);
	Mat r = channels.at(0);
	Mat g = channels.at(1);
	Mat b = channels.at(2);
	Mat a = channels.at(3);
 
 
	vector <Mat> mbgr(4);
	mbgr[0] = b;
	mbgr[1] = g;
	mbgr[2] = r;
	mbgr[3] = a;
 
 
	merge(mbgr, rgba);
 
 
	jenv->ReleaseByteArrayElements(YuvNv21, pBuf, 0);
	jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  RgbaUndistort
 * Signature: ([III[I)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_RgbaUndistort
 (JNIEnv *jenv, jclass jclassz, jintArray argb, jint width, jint height, jintArray pixels){
	jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
	jint * pinPixels = jenv->GetIntArrayElements(argb, 0);
 
 
	Mat out(height, width, CV_8UC4, (unsigned char*) poutPixels);
	Mat in(height, width, CV_8UC4, (unsigned char*) pinPixels);
 
 
	double cam[] = {width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
	undistort(in, out, camMat, disMat);
 
 
	jenv->ReleaseIntArrayElements(argb, pinPixels, 0);
	jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  RgbaUndistort2
 * Signature: ([[III[I)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_RgbaUndistort2(JNIEnv *jenv,
		jclass jclassz, jobjectArray argb, jint width, jint height,
		jintArray pixels) {
 
 
	jint i, j;
	int row = jenv->GetArrayLength(argb);
	jintArray myarray = (jintArray)(jenv->GetObjectArrayElement(argb, 0));
	int col = jenv->GetArrayLength(myarray);
	jint jniData[row][col];
	LOGD("jiaXXX %s", "Java_ImgProc_ImageProc_convertRGB3");
	for (i = 0; i < row; i++) {
		myarray = (jintArray)(jenv->GetObjectArrayElement(argb, i));
		jint *coldata = jenv->GetIntArrayElements(myarray, 0);
 
 
		for (j = 0; j < col; j++) {
			jniData[i][j] = coldata[j];
			LOGD("jiaXXX %d", jniData[i][j]);
		}
 
 
		jenv->ReleaseIntArrayElements(myarray, coldata, 0);
 
 
	}
 
 
	Mat img = Mat(row, col, CV_8UC4, jniData);
	LOGD("jiaXXX %x", img.at<unsigned int>(1, 1));
 
 
	double cam[] = {width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
 
 
	jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
	Mat out(height, width, CV_8UC4, (unsigned char*) poutPixels);
	undistort(img, out, camMat, disMat);
 
 
	jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  RgbaUndistortMat
 * Signature: ([IIIJ)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_RgbaUndistortMat
 (JNIEnv *jenv, jclass jclassz, jintArray argb, jint width, jint height, jlong pArgbOutMatAddr){
 
 
	//jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
	jint * pinPixels = jenv->GetIntArrayElements(argb, 0);
 
 
	//Mat out(height, width, CV_8UC4, (unsigned char*) poutPixels);
	Mat in(height, width, CV_8UC4, (unsigned char*) pinPixels);
	Mat out = *((Mat*)pArgbOutMatAddr);
 
 
	double cam[] = {width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
	undistort(in, out, camMat, disMat);
 
 
	jenv->ReleaseIntArrayElements(argb, pinPixels, 0);
	//jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  RgbMatUndistortMat
 * Signature: (JIIJ)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_RgbMatUndistortMat
 (JNIEnv *jenv, jclass jclassz, jlong pArgbMatAddr, jint width, jint height, jlong pArgbOutMatAddr){
 
 
	Mat in=*((Mat*)pArgbMatAddr);
	Mat out = *((Mat*)pArgbOutMatAddr);
 
 
	double cam[] = {width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
	undistort(in, out, camMat, disMat);
 
 
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  YuvNv21UndistortRgba
 * Signature: ([BII[I)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_YuvNv21UndistortRgba
 (JNIEnv *jenv, jclass jclassz, jbyteArray YuvNv21, jint width, jint height, jintArray pixels){
 
 
	jbyte * pBuf = (jbyte*) jenv->GetByteArrayElements(YuvNv21, 0);
	jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
 
 
	Mat image(height + height / 2, width, CV_8UC1, (unsigned char *) pBuf);
	Mat rgba(height, width, CV_8UC4, (unsigned char*) poutPixels);
	Mat tmp(height, width, CV_8UC4);
	cvtColor(image, tmp, CV_YUV420sp2RGBA);
 
 
	double cam[] = { width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
	undistort(tmp, tmp, camMat, disMat);
 
 
	vector < Mat > channels;
	split(tmp, channels);
	Mat r = channels.at(0);
	Mat g = channels.at(1);
	Mat b = channels.at(2);
	Mat a = channels.at(3);
 
 
	vector < Mat > mbgr(4);
	mbgr[0] = b;
	mbgr[1] = g;
	mbgr[2] = r;
	mbgr[3] = a;
 
 
	merge(mbgr, rgba);
 
 
	jenv->ReleaseByteArrayElements(YuvNv21, pBuf, 0);
	jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
	return true;
}
 
 
/*
 * Class:   ImgProc_ImageProc3
 * Method:  YuvNv21UndistortRgbaMat
 * Signature: ([BIIJ)Z
 */
JNIEXPORT jboolean JNICALL Java_ImgProc_ImageProc3_YuvNv21UndistortRgbaMat
 (JNIEnv *jenv, jclass jclassz, jbyteArray YuvNv21, jint width, jint height, jlong pMatAddr){
 
 
	jbyte * pBuf = (jbyte*) jenv->GetByteArrayElements(YuvNv21, 0);
	//jint * poutPixels = jenv->GetIntArrayElements(pixels, 0);
 
 
	Mat image(height + height / 2, width, CV_8UC1, (unsigned char *) pBuf);
	//Mat rgba(height, width, CV_8UC4, (unsigned char*) poutPixels);
	Mat rgba = *((Mat*) pMatAddr);
	Mat tmp(height, width, CV_8UC4);
	cvtColor(image, tmp, CV_YUV420sp2RGBA);
 
 
	double cam[] = { width, 0, width / 2, 0, height, height / 2, 0, 0, 1 };
	double distort[] = { 0.1, 0.35, 0.0, 0.0, 0.01 };
 
 
	Mat camMat = Mat(3, 3, CV_64FC1, cam);
	Mat disMat = Mat(5, 1, CV_64FC1, distort);
	undistort(tmp, tmp, camMat, disMat);
 
 
	vector < Mat > channels;
	split(tmp, channels);
	Mat r = channels.at(0);
	Mat g = channels.at(1);
	Mat b = channels.at(2);
	Mat a = channels.at(3);
 
 
	vector < Mat > mbgr(4);
	mbgr[0] = b;
	mbgr[1] = g;
	mbgr[2] = r;
	mbgr[3] = a;
 
 
	merge(mbgr, rgba);
 
 
	jenv->ReleaseByteArrayElements(YuvNv21, pBuf, 0);
	//jenv->ReleaseIntArrayElements(pixels, poutPixels, 0);
 
 
	return true;
}
 
 
#ifdef __cplusplus
}
#endif

以上这篇利用OPENCV为android开发畸变校正的JNI库方法就是小编分享给大家的全部内容了，希望能给大家一个参考，也希望大家多多支持脚本之家。

您可能感兴趣的文章:

相关文章

  • 一款不错的android6.0、7.0权限管理器推荐

    一款不错的android6.0、7.0权限管理器推荐

    下面小编就为大家分享一篇一款不错的android6.0、7.0权限管理器推荐，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧
    2018-01-01
  • 深入浅析Android接口回调机制

    深入浅析Android接口回调机制

    在Android中到处可见接口回调机制，尤其是UI事件处理方面，本文给大家介绍android接口回调机制，涉及到android接口回调相关知识，对本文感兴趣的朋友可以参考下本篇文章
    2015-11-11
  • 浅谈Android编码规范及命名规范

    浅谈Android编码规范及命名规范

    本文主要总结一下Android项目的开发规范：1、编码规范 2、命名规范。有需要的朋友可以看下
    2016-12-12
  • Android CalendarView，DatePicker,TimePicker,以及NumberPicker的使用

    Android CalendarView，DatePicker,TimePicker,以及NumberPicker的使

    这篇文章主要介绍了Android CalendarView，DatePicker,TimePicker,以及NumberPicker的使用的相关资料,需要的朋友可以参考下
    2016-12-12
  • Android编程实现将应用强制安装到手机内存的方法

    Android编程实现将应用强制安装到手机内存的方法

    这篇文章主要介绍了Android编程实现将应用强制安装到手机内存的方法,分析了Android程序安装的相关属性设置技巧及注意事项,需要的朋友可以参考下
    2015-12-12
  • 聊一聊Android中的StateListAnimator

    聊一聊Android中的StateListAnimator

    这篇文章主要给大家介绍了关于Android中StateListAnimator的相关资料，文中通过示例代码介绍的非常详细，对各位Android开发者们具有一定的参考学习价值，需要的朋友们下面来一起学习学习吧
    2019-12-12
  • Notification自定义界面

    Notification自定义界面

    这篇文章主要为大家详细介绍了Notification自定义界面的相关资料，具有一定的参考价值，感兴趣的小伙伴们可以参考一下
    2017-11-11
  • 详解Android中Service AIDL的使用

    详解Android中Service AIDL的使用

    作为一名Android开发人员，如果没听过Service,那就有点说不过去了啊，Service是Android四大组件之一，它是不依赖于用户界面的，就是因为Service不依赖与用户界面，所以我们常常用于进行一些耗时的操作，比如：下载数据等；本文将详细介绍Android中Service AIDL的使用。
    2021-06-06
  • Android通话记录备份实现代码

    Android通话记录备份实现代码

    其实就是解析文件，存入数据库；或者查询数据库，存入文件而已，特分享下，方便需要的朋友
    2013-05-05
  • 保存ListView上次的滚动条的位置实例(必看)

    保存ListView上次的滚动条的位置实例(必看)

    下面小编就为大家带来一篇保存ListView上次的滚动条的位置实例(必看)。小编觉得挺不错的，现在就分享给大家，也给大家做个参考。一起跟随小编过来看看吧
    2017-03-03

最新评论