Linux ssh服务器配置代码实例
更新时间：2020年09月11日 11:53:01 作者：陌鉎こ城sHi
这篇文章主要介绍了Linux ssh服务器配置代码实例,文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值,需要的朋友可以参考下
使用如下终端命令可以在 Linux 主机中安装 ssh服务器sudo apt-get install openssh-server
lin@lin-machine:~$ sudo apt-get install openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libck-connector0 ncurses-term openssh-client openssh-sftp-server ssh-import-id Suggested packages: libpam-ssh keychain monkeysphere rssh molly-guard The following NEW packages will be installed: libck-connector0 ncurses-term openssh-server openssh-sftp-server ssh-import-id The following packages will be upgraded: openssh-client 1 upgraded, 5 newly installed, 0 to remove and 438 not upgraded. Need to get 1,180 kB of archives. After this operation, 3,429 kB of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libck-connector0 amd64 0.4.5-3.1ubuntu2 [10.5 kB] Get:2 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-client amd64 1:6.6p1-2ubuntu2.11 [564 kB] Get:3 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ncurses-term all 5.9+20140118-1ubuntu1 [243 kB] Get:4 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-sftp-server amd64 1:6.6p1-2ubuntu2.11 [34.1 kB] Get:5 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-server amd64 1:6.6p1-2ubuntu2.11 [318 kB] Get:6 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ssh-import-id all 3.21-0ubuntu1 [9,624 B] Fetched 1,180 kB in 22s (51.6 kB/s) Preconfiguring packages ... Selecting previously unselected package libck-connector0:amd64. (Reading database ... 168838 files and directories currently installed.) Preparing to unpack .../libck-connector0_0.4.5-3.1ubuntu2_amd64.deb ... Unpacking libck-connector0:amd64 (0.4.5-3.1ubuntu2) ... Preparing to unpack .../openssh-client_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-client (1:6.6p1-2ubuntu2.11) over (1:6.6p1-2ubuntu2.7) ... Selecting previously unselected package ncurses-term. Preparing to unpack .../ncurses-term_5.9+20140118-1ubuntu1_all.deb ... Unpacking ncurses-term (5.9+20140118-1ubuntu1) ... Selecting previously unselected package openssh-sftp-server. Preparing to unpack .../openssh-sftp-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-sftp-server (1:6.6p1-2ubuntu2.11) ... Selecting previously unselected package openssh-server. Preparing to unpack .../openssh-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ... Unpacking openssh-server (1:6.6p1-2ubuntu2.11) ... Selecting previously unselected package ssh-import-id. Preparing to unpack .../ssh-import-id_3.21-0ubuntu1_all.deb ... Unpacking ssh-import-id (3.21-0ubuntu1) ... Processing triggers for man-db (2.6.7.1-1ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... ureadahead will be reprofiled on next reboot Processing triggers for ufw (0.34~rc-0ubuntu2) ... Setting up libck-connector0:amd64 (0.4.5-3.1ubuntu2) ... Setting up openssh-client (1:6.6p1-2ubuntu2.11) ... Setting up ncurses-term (5.9+20140118-1ubuntu1) ... Setting up openssh-sftp-server (1:6.6p1-2ubuntu2.11) ... Setting up openssh-server (1:6.6p1-2ubuntu2.11) ... Creating SSH2 RSA key; this may take some time ... Creating SSH2 DSA key; this may take some time ... Creating SSH2 ECDSA key; this may take some time ... Creating SSH2 ED25519 key; this may take some time ... ssh start/running, process 17527 Setting up ssh-import-id (3.21-0ubuntu1) ... Processing triggers for libc-bin (2.19-0ubuntu6.9) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for ufw (0.34~rc-0ubuntu2) ...
查看当前的虚拟机的ip地址
lin@lin-machine:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:f1:a1:37
inet addr:192.168.147.136 Bcast:192.168.147.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fef1:a137/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3950 errors:0 dropped:0 overruns:0 frame:0
TX packets:514 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1453734 (1.4 MB) TX bytes:63371 (63.3 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:180 errors:0 dropped:0 overruns:0 frame:0
TX packets:180 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:13377 (13.3 KB) TX bytes:13377 (13.3 KB)
在PC上查看ip地址
Microsoft Windows [版本 6.1.7601] 版权所有 (c) 2009 Microsoft Corporation。保留所有权利。 E:\Users\libra>ipconfig Windows IP 配置 ... 以太网适配器 VMware Network Adapter VMnet8: 连接特定的 DNS 后缀 . . . . . . . : 本地链接 IPv6 地址. . . . . . . . : fe80::9074:b9f5:ddaf:9082%25 IPv4 地址 . . . . . . . . . . . . : 192.168.147.1 子网掩码 . . . . . . . . . . . . : 255.255.255.0 默认网关. . . . . . . . . . . . . : ... E:\Users\libra>
【备注】pc和linux虚拟机在同个网段的
测试他们是否可以ping
lin@lin-machine:~$ ping 192.168.147.1 PING 192.168.147.1 (192.168.147.1) 56(84) bytes of data. 64 bytes from 192.168.147.1: icmp_seq=1 ttl=64 time=0.586 ms 64 bytes from 192.168.147.1: icmp_seq=2 ttl=64 time=0.442 ms 64 bytes from 192.168.147.1: icmp_seq=3 ttl=64 time=0.435 ms ^C --- 192.168.147.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.435/0.487/0.586/0.074 ms
【可能存在一些异常的原因】注意： Windows 7 默认打开了系统防火墙，是禁ping的，如果在Linux下ping Windows
7，需要先关闭Windows 7 的防火墙。
没有问题后我们在SecureCRT上开始测试
【备注】根据自己的情况来写IP和主机名
来测试一下
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。
相关文章
今天小编就为大家分享一篇对Linux终端使用socks5代理的方法详解，具有很好的参考价值，希望对大家有所帮助。一起跟随小编过来看看吧2019-07-07
本篇文章主要介绍了详解Ubuntu 16.04 几个国内更新源，可以在软件更新中选择源，一起跟随小编过来看看吧2017-04-04
这篇文章主要介绍了linux安装全中文管理面板教程(php+mysql运行环境),需要的朋友可以参考下2014-09-09
下面小编就为大家带来一篇Linux下实现UTF-8和GB2312互相转换的方法。小编觉得挺不错的，现在就分享给大家，也给大家做个参考。一起跟随小编过来看看吧，祝大家游戏愉快哦2016-12-12
这篇文章主要介绍了Centos中如何设置IP地址问题,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教2024-09-09
本文主要介绍了Windows10安装Apache2.4的方法步骤，文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值，需要的朋友们下面随着小编来一起学习学习吧<BR>2022-06-06
预防PHPDDOS的发包攻击别人的方法(iis+linux)
最近很多美国VPS客户被人通过dedecms漏洞等等入侵.导致phpddos 很猖狂，占用大量带宽，影响网站，浪费流量2012-04-04
关于安装linux redhat后无法使用yum命令安装gcc-c++问题的解决过程
这篇文章主要介绍了关于安装linux redhat后无法使用yum命令安装gcc-c++问题的解决过程,需要的朋友可以参考下2017-08-08
这篇文章主要介绍了CentOS8版本的root密码快速修改方法，本文图文并茂通过实例讲解的非常详细，对大家的学习或工作具有一定的参考借鉴价值,需要的朋友可以参考下2020-03-03
Apache Iceberg是一个开源表格格式,用于大型分析数据集,本文主要介绍了如何通过快照、Manifest文件和元数据文件查询Iceberg表的数据,通过解析元数据文件获取当前表的快照ID,进而读取对应的Avro文件和Manifest文件中的Parquet数据文件,感兴趣的朋友一起看看吧2024-09-09
最新评论