iOS关闭虚拟键盘方法汇总

 更新时间:2016年04月08日 09:21:05   作者:jerrylsxu  
在iOS应用开发中,有三类视图对象会打开虚拟键盘,进行输入操作,但如何关闭虚拟键盘,却没有提供自动化的方法

在iOS应用开发中,有三类视图对象会打开虚拟键盘,进行输入操作,但如何关闭虚拟键盘,却没有提供自动化的方法。这个需要我们自己去实现。这三类视图对象分别是UITextField,UITextView和UISearchBar。 这里介绍一下UITextField中关闭虚拟键盘的几种方法。

第一种方法,使用它的委托UITextFieldDelegate中的方法textFieldShouldReturn:来关闭虚拟键盘。

在UITextField视图对象如birdNameInput所在的类中实现这个方法。

(BOOL)textFieldShouldReturn:(UITextField *)textField { 
if ((textField == self.birdNameInput) || (textField == self.locationInput)) { 
[textField resignFirstResponder]; 
} 
return YES; 
} 
- (BOOL)textFieldShouldReturn:(UITextField *)textField {
if ((textField == self.birdNameInput) || (textField == self.locationInput)) {
[textField resignFirstResponder];
}
return YES;
}

这样,在输入框birdNameInput中打开虚拟键盘后,轻击键盘的return键就会自动关闭掉虚拟键盘。

第二种方法,将birdNameInput的属性中Return Key修改为done,再定义一个方法和Done键的Did End On Exit连接。

通过轻击done键触发这个事件来关闭虚拟键盘。

定义的方法如下:

(IBAction) textFieldDoneEditing:(id)sender 
{ 
[sender resignFirstResponder]; 
} 
- (IBAction) textFieldDoneEditing:(id)sender
{
[sender resignFirstResponder];
}

这两个方法都是轻击虚拟键盘上一个键来关闭它。这属于精确操作,而手指不像鼠标,做这种操作不容易。因此就UI层面而言,这两个方法都不是最好的方法。 在iphone或ipad屏幕上,虚拟键盘占用的面积大小是有限的。通过轻击虚拟键盘之外的区域而关闭虚拟键盘。

第三种方法,通过轻击键盘之外的空白区域关闭虚拟键盘。

在birdNameInput所属的视图控制器类的viewDidLoad方法中定义一个UITapGestureRecognizer的对象,然后将它赋值为它的视图。

UITapGestureRecognizer *tap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(dismissKeyboard)]; 
[self.view addGestureRecognizer:tap]; 
[tap release];
UITapGestureRecognizer *tap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(dismissKeyboard)];
[self.view addGestureRecognizer:tap];
[tap release];

再定义一下选择器调用的方法dismissKeyboard。

(void)dismissKeyboard { 
[birdNameInput resignFirstResponder]; 
} 
-(void)dismissKeyboard {
[birdNameInput resignFirstResponder];
}

如果屏幕上有多个textField的话,一个一个地列出来就有些麻烦。那么将方法修改一下,如下:

(void)dismissKeyboard { 
NSArray *subviews = [self.view subviews]; 
for (id objInput in subviews) { 
if ([objInput isKindOfClass:[UITextField class]]) { 
UITextField *theTextField = objInput; 
if ([objInput isFirstResponder]) { 
[theTextField resignFirstResponder]; 
} 
} 
} 
} 
-(void)dismissKeyboard {
NSArray *subviews = [self.view subviews];
for (id objInput in subviews) {
if ([objInput isKindOfClass:[UITextField class]]) {
UITextField *theTextField = objInput;
if ([objInput isFirstResponder]) {
[theTextField resignFirstResponder];
}
}
}
}

如果这个屏幕上的视图对象很复杂的话,另当别论。 这个方法是编码新建一个手势对象。也可以直接使用interface builder图形化开发工具,在storyboard中拉入一个手势对象到视图控制器类中,再将此手势对象建立一个IBACTION,名称可以是dismissKeyboard。

第四种方法,通过轻击键盘之外的空白区域关闭虚拟键盘。

将屏幕上的view也就是textField的父视图拖一个touch down事件出来,和一个能关闭虚拟键盘的方法连接。如果视图没有touch down事件,可将view的父类从UIView修改为UIButton。 首先定义并实现一个方法backgroundTap:。

(IBAction) backgroundTap:(id)sender 
{ 
NSArray *subviews = [self.view subviews]; 
for (id objInput in subviews) { 
if ([objInput isKindOfClass:[UITextField class]]) { 
UITextField *theTextField = objInput; 
if ([objInput isFirstResponder]) { 
[theTextField resignFirstResponder]; 
} 
} 
} 
} 
- (IBAction) backgroundTap:(id)sender
{
NSArray *subviews = [self.view subviews];
for (id objInput in subviews) {
if ([objInput isKindOfClass:[UITextField class]]) {
UITextField *theTextField = objInput;
if ([objInput isFirstResponder]) {
[theTextField resignFirstResponder];
}
}
}
}

然后选择背景视图的Touch Down事件,连接 backgroundTap:即可。这样只要轻击一下虚拟键盘之外的区域,就能关闭虚拟键盘。这些方法都是使用resignFirstResponder方法来关闭虚拟键盘,还有其他的方法。

第五种方法,使用endEditing:方法 在所在的视图控制器类中,覆盖这个方法

(void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { 
[[self view] endEditing:YES]; 
} 
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
[[self view] endEditing:YES];
}

This method looks at the current view and its subview hierarchy for the text field that is currently the first responder. If it finds one, it asks that text field to resign as first responder. If the force parameter is set to YES, the text field is never even asked; it is forced to resign.

但是,如果这个屏幕很复杂,虚拟键盘之外的区域中有很多按钮。轻击这些区域时可能会轻击到这些按钮,这样虚拟键盘就不能关闭。

要是找到一个没有按钮的空白区域都不容易且还有隐藏的视图对象时,通过轻击虚拟键盘之外的区域关闭虚拟键盘的方法实现起来就难了。

第六种方法,覆盖hitTest:withEvent:方法关闭虚拟键盘

在stackoverflow.com上,有人这样总结。说使用hitTest:withEvent:方法是最好的,也是最容易的解决方法。

I think the easiest (and best) way to do this is to subclass your global view and use hitTest:withEvent method to listen to any touch. Touches on keyboard aren't registered, so hitTest:withEvent is only called when you touch/scroll/swipe/pinch... somewhere else, then call [self endEditing:YES]. This is better than using touchesBegan because touchesBegan are not called if you click on a button on top of the view. It is better than UITapGestureRecognizer which can't recognize a scrolling gesture for example. It is also better than using a dim screen because in a complexe and dynamic user interface, you can't put dim screen every where. Moreover, it doesn't block other actions, you don't need to tap twice to select a button outside (like in the case of a UIPopover). Also, it's better than calling [textField resignFirstResponder], because you may have many text fields on screen, so this works for all of them.

因此,我再建立一个继承UIView的视图类。在这个视图类中,覆盖hitTest:withEvent:方法,增加[self endEditing:YES]方法。

(UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event { 
UIView *result = [super hitTest:point withEvent:event]; 
[self endEditing:YES] 
return result; 
} 
- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event {
UIView *result = [super hitTest:point withEvent:event];
[self endEditing:YES]
return result;
}

我将视图控制器的主视图所属类修改为这个新建视图类。这样在屏幕上轻击任何位置都会关闭虚拟键盘。 这个方法是最简单,也是最好的关闭虚拟键盘的方法。 使用好hitTest:withEvent:这个方法,还可以实现很多很复杂的功能。

The implementation of hitTest:withEvent: in UIResponder does the following:

• It calls pointInside:withEvent: of self
• If the return is NO, hitTest:withEvent: returns nil. the end of the story.
• If the return is YES, it sends hitTest:withEvent: messages to its subviews. it starts from the top-level subview, and continues to other views until a subview returns a non-nil object, or all subviews receive the message.
• If a subview returns a non-nil object in the first time, the first hitTest:withEvent: returns that object. the end of the story.
• If no subview returns a non-nil object, the first hitTest:withEvent: returns self
This process repeats recursively, so normally the leaf view of the view hierarchy is returned eventually. However, you might override hitTest:withEvent to do something differently. In many cases, overriding pointInside:withEvent: is simpler and still provides enough options to tweak event handling in your application.

以上给大家介绍了六种iOS关闭虚拟键盘的方法,大家可以根据个人需要选择一种适合自己比较好的方法。同时也非常感谢大家对脚本之家网站的支持!

相关文章

  • ios实现底部PopupWindow的示例代码(底部弹出菜单)

    ios实现底部PopupWindow的示例代码(底部弹出菜单)

    这篇文章主要介绍了ios实现底部PopupWindow的示例代码(底部弹出菜单),小编觉得挺不错的,现在分享给大家,也给大家做个参考。一起跟随小编过来看看吧
    2018-01-01
  • swift 常用高阶函数分享

    swift 常用高阶函数分享

    Swift是一门面向协议的语言,在使用Swift时我们已经充分享受到了面向协议编程带给我们的便利,但是Swift相比Obj-C还有一个更重要的优点,那就是对函数式编程提供了很好的支持,其中Swift提供了map,filter,reduce这三个高阶函数Higher Order function作为对容器的支持
    2017-12-12
  • iOS UISegmentControl实现自定义分栏效果

    iOS UISegmentControl实现自定义分栏效果

    这篇文章主要为大家详细介绍了iOS UISegmentControl实现自定义分栏效果,文中示例代码介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们可以参考一下
    2022-03-03
  • ios中Deep Linking实例分析用法

    ios中Deep Linking实例分析用法

    本篇文章给大家分享了在IOS中Deep Linking的用法以及代码实例,有兴趣的朋友跟着学习下吧。
    2018-01-01
  • iOS9提示框的正确使用方式

    iOS9提示框的正确使用方式

    这篇文章主要为大家详细介绍了iOS9提示框的正确使用方式,iOS8升级到iOS9的过程,弹出提示框的方式有了很大的改变,感兴趣的小伙伴们可以参考一下
    2016-05-05
  • IOS Object-C 中Runtime详解及实例代码

    IOS Object-C 中Runtime详解及实例代码

    这篇文章主要介绍了IOS Object-C 中Runtime详解及实例代码的相关资料,OC中的对象其实在Runtime中都会用结构体来表示,这个结构体中包含了类名、成员变量列表、方法列表、协议列表、缓存等,需要的朋友可以参考下
    2017-03-03
  • 源码解析ios开发SDWebImage方法

    源码解析ios开发SDWebImage方法

    这篇文章主要为大家介绍了源码解析ios开发SDWebImage方法详解,有需要的朋友可以借鉴参考下,希望能够有所帮助,祝大家多多进步,早日升职加薪
    2022-08-08
  • 利用iOS手势与scrollView代理实现图片的放大缩小

    利用iOS手势与scrollView代理实现图片的放大缩小

    这篇文章主要介绍了利用iOS的手势、scrollView代理来实现图片放大缩小的方法,文中通过示例代码介绍的很详细,相信对各位iOS开发者们来说具有一定的参考借鉴价值,有需要的朋友们下面来一起学习学习吧。
    2017-01-01
  • iOS10适配之权限Crash问题的完美解决方案

    iOS10适配之权限Crash问题的完美解决方案

    这篇文章主要为大家详细介绍了iOS10适配之权限Crash问题的完美解决方案,具有一定的参考价值,感兴趣的小伙伴们可以参考一下
    2016-09-09
  • iOS如何定义名为任意的变量详解

    iOS如何定义名为任意的变量详解

    这篇文章主要给大家介绍了关于iOS如何定义名为任意的变量的相关资料,文中通过示例代码介绍的非常详细,对各位iOS开发者们具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧。
    2018-05-05

最新评论