iOS如何获取手机的Mac地址

 更新时间:2016年04月27日 16:37:25   作者:showhilllee  
这篇文章主要为大家详细介绍了iOS获取手机的Mac地址的多种方法,感兴趣的小伙伴们可以参考一下

首先说明下,下面两种方法均可以获得手机的mac地址,但是有个限制,是在iOS7以下才可以获得。iOS7以后苹果对于sysctl和ioctl进行了技术处理,MAC地址返回的都是02:00:00:00:00:00。

官方文档上这样写的:

"Twolow-level networking APIs that used to return a MAC address now return thefixed value 02:00:00:00:00:00. The APIs in question are sysctl(NET_RT_IFLIST) and ioctl(SIOCGIFCONF). Developers using the value of the MAC address should migrate toidentifiers such as -[UIDevice identifierForVendor].This change affects all apps running on iOS 7”。

所以在iOS7以后想要获取设备的唯一标示Mac地址已经不行了,只能用其他的代替。
下面说下两种方式:
都需要导入几个头文件

#include <sys/sysctl.h> 
#include <net/if.h> 
#include <net/if_dl.h> 

方法1:

// Return the local MAC addy 
// Courtesy of FreeBSD hackers email list 
// Accidentally munged during previous update. Fixed thanks to mlamb. 
- (NSString *) macaddress 
{ 
   
  int         mib[6]; 
  size_t       len; 
  char        *buf; 
  unsigned char    *ptr; 
  struct if_msghdr  *ifm; 
  struct sockaddr_dl *sdl; 
   
  mib[0] = CTL_NET; 
  mib[1] = AF_ROUTE; 
  mib[2] = 0; 
  mib[3] = AF_LINK; 
  mib[4] = NET_RT_IFLIST; 
   
  if ((mib[5] = if_nametoindex("en0")) == 0) { 
    printf("Error: if_nametoindex error/n"); 
    return NULL; 
  } 
   
  if (sysctl(mib, 6, NULL, &len, NULL, 0) < 0) { 
    printf("Error: sysctl, take 1/n"); 
    return NULL; 
  } 
   
  if ((buf = malloc(len)) == NULL) { 
    printf("Could not allocate memory. error!/n"); 
    return NULL; 
  } 
   
  if (sysctl(mib, 6, buf, &len, NULL, 0) < 0) { 
    printf("Error: sysctl, take 2"); 
    return NULL; 
  } 
   
  ifm = (struct if_msghdr *)buf; 
  sdl = (struct sockaddr_dl *)(ifm + 1); 
  ptr = (unsigned char *)LLADDR(sdl); 
  NSString *outstring = [NSString stringWithFormat:@"%02x:%02x:%02x:%02x:%02x:%02x", *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), *(ptr+5)]; 
   
//  NSString *outstring = [NSString stringWithFormat:@"%02x%02x%02x%02x%02x%02x", *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), *(ptr+5)]; 
   
  NSLog(@"outString:%@", outstring); 
   
  free(buf); 
   
  return [outstring uppercaseString]; 
}

 方法2:

 - (NSString *)getMacAddress 
{ 
  int         mgmtInfoBase[6]; 
  char        *msgBuffer = NULL; 
  size_t       length; 
  unsigned char    macAddress[6]; 
  struct if_msghdr  *interfaceMsgStruct; 
  struct sockaddr_dl *socketStruct; 
  NSString      *errorFlag = NULL; 
   
  // Setup the management Information Base (mib) 
  mgmtInfoBase[0] = CTL_NET;    // Request network subsystem 
  mgmtInfoBase[1] = AF_ROUTE;    // Routing table info 
  mgmtInfoBase[2] = 0; 
  mgmtInfoBase[3] = AF_LINK;    // Request link layer information 
  mgmtInfoBase[4] = NET_RT_IFLIST; // Request all configured interfaces 
   
  // With all configured interfaces requested, get handle index 
  if ((mgmtInfoBase[5] = if_nametoindex("en0")) == 0) 
    errorFlag = @"if_nametoindex failure"; 
  else 
  { 
    // Get the size of the data available (store in len) 
    if (sysctl(mgmtInfoBase, 6, NULL, &length, NULL, 0) < 0) 
      errorFlag = @"sysctl mgmtInfoBase failure"; 
    else 
    { 
      // Alloc memory based on above call 
      if ((msgBuffer = malloc(length)) == NULL) 
        errorFlag = @"buffer allocation failure"; 
      else 
      { 
        // Get system information, store in buffer 
        if (sysctl(mgmtInfoBase, 6, msgBuffer, &length, NULL, 0) < 0) 
          errorFlag = @"sysctl msgBuffer failure"; 
      } 
    } 
  } 
   
  // Befor going any further... 
  if (errorFlag != NULL) 
  { 
    NSLog(@"Error: %@", errorFlag); 
    return errorFlag; 
  } 
   
  // Map msgbuffer to interface message structure 
  interfaceMsgStruct = (struct if_msghdr *) msgBuffer; 
   
  // Map to link-level socket structure 
  socketStruct = (struct sockaddr_dl *) (interfaceMsgStruct + 1); 
   
  // Copy link layer address data in socket structure to an array 
  memcpy(&macAddress, socketStruct->sdl_data + socketStruct->sdl_nlen, 6); 
   
  // Read from char array into a string object, into traditional Mac address format 
  NSString *macAddressString = [NSString stringWithFormat:@"%02x:%02x:%02x:%02x:%02x:%02x", 
                 macAddress[0], macAddress[1], macAddress[2], 
                 macAddress[3], macAddress[4], macAddress[5]]; 
  NSLog(@"Mac Address: %@", macAddressString); 
   
  // Release the buffer memory 
  free(msgBuffer); 
   
  return macAddressString; 
} 

以上就是iOS获取手机的Mac地址的两种方法,希望对大家的学习有所帮助。

相关文章

  • IOS 线程死锁详细介绍

    IOS 线程死锁详细介绍

    这篇文章主要介绍了IOS 线程死锁详细介绍的相关资料,需要的朋友可以参考下
    2017-02-02
  • iOS 设置导航条透明效果的实例代码

    iOS 设置导航条透明效果的实例代码

    本文通过实例代码给大家介绍了ios 设置导航条透明效果,非常不错,具有参考借鉴价值,需要的朋友参考下吧
    2018-03-03
  • 总结IOS界面间跳转的几种方法

    总结IOS界面间跳转的几种方法

    前段时间被问到界面间的跳转有几种方式?想不到说的竟有点含糊其辞,于是就想总结一下。有句话说的好,“前人种树,后人乘凉”,目前作为一个乘凉者,我也希望能种一些树木,为代码世界营造一份清新。好了,话不多说,进入主题。
    2016-08-08
  • iOS自动移除KVO观察者的实现方法

    iOS自动移除KVO观察者的实现方法

    在 Apple 的应用开发里 KVO 提供了一个途径,使对象(观察者)能够观察其他对象(被观察者)的属性,当被观察者的属性发生变化时,观察者就会被告知该变化。下面这篇文章主要给大家介绍了关于iOS如何自动移除KVO观察者的实现方法,需要的朋友可以参考下。
    2017-12-12
  • iOS Objective-c实现左右滑动切换页面

    iOS Objective-c实现左右滑动切换页面

    这篇文章主要为大家详细介绍了iOS Objective-c实现左右滑动切换页面,文中示例代码介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们可以参考一下
    2022-08-08
  • 两行IOS代码实现轮播图

    两行IOS代码实现轮播图

    这篇文章主要为大家详细介绍了两行IOS代码实现轮播图,文中示例代码介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们可以参考一下
    2019-12-12
  • 详解Objective C 中Block如何捕获外部值

    详解Objective C 中Block如何捕获外部值

    这篇文章主要为大家介绍了详解Objective C 中Block如何捕获外部值实现示例,有需要的朋友可以借鉴参考下,希望能够有所帮助,祝大家多多进步,早日升职加薪
    2022-09-09
  • iOS13即将到来,iOS推送DeviceToken适配方案详解

    iOS13即将到来,iOS推送DeviceToken适配方案详解

    这篇文章主要介绍了iOS13即将到来,iOS推送DeviceToken适配方案详解,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧
    2019-09-09
  • iOS中延时执行的几种方式比较及汇总

    iOS中延时执行的几种方式比较及汇总

    这篇文章主要给大家介绍了关于iOS中延时执行的几种方式比较及汇总,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一起学习学习吧。
    2018-02-02
  • 全面解析iOS应用中自定义UITableViewCell的方法

    全面解析iOS应用中自定义UITableViewCell的方法

    这篇文章主要介绍了iOS应用开发中自定义UITableViewCell的方法,示例为传统的Obejective-C语言,需要的朋友可以参考下
    2016-04-04

最新评论