详解Oracle dg 三种模式切换

更新时间：2015年12月22日 11:16:45 投稿：mrr

这篇文章主要介绍了详解Oracle dg 三种模式切换的相关资料,需要的朋友可以参考下

oracle dg 三大模式切换

===================================
1 最大性能模式MAXIMUM PERFORMANCE ------默认模式
===================================

一最大性能模式特点

192.168.1.181
SQL> select database_role,protection_mode,protection_level from v$database;
DATABASE_ROLE  PROTECTION_MODE   PROTECTION_LEVEL
---------------- -------------------- --------------------
PRIMARY     MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_config          string   dg_config=(orcl,db01)
log_archive_dest_1          string   location=/home/oracle/arch_orc
                         l valid_for=(all_logfiles,all_
                         roles) db_unique_name=orcl
log_archive_dest_2          string   service=db_db01 LGWR ASYNC val
                         id_for=(online_logfiles,primar
                         y_roles) db_unique_name=db01
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   31
Next log sequence to archive  33
Current log sequence      33
192.168.1.183
SQL> select database_role,protection_mode,protection_level from v$database;
DATABASE_ROLE  PROTECTION_MODE   PROTECTION_LEVEL
---------------- -------------------- --------------------
PHYSICAL STANDBY MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_config          string   dg_config=(db01,orcl)
log_archive_dest_1          string   location=/home/oracle/arch_db0
                         1 valid_for=(all_logfiles,all_
                         roles) db_unique_name=db01
log_archive_dest_2          string   service=db_orcl LGWR ASYNC val
                         id_for=(online_logfiles,primar
                         y_roles) db_unique_name=orcl
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   31
Next log sequence to archive  33
Current log sequence      33
192.168.1.181
SQL> alter system switch logfile;
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   32
Next log sequence to archive  34
Current log sequence      34
192.168.1.183
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_db01
Oldest online log sequence   32
Next log sequence to archive  0
Current log sequence      34

===================================
2 最大性能模式--切换到-->最大高可用 (默认是最大性能模式---MAXIMUM PERFORMANCE)
===================================

192.168.1.181
SQL> select DATABASE_ROLE,PROTECTION_MODE,PROTECTION_LEVEL from v$database; 
DATABASE_ROLE  PROTECTION_MODE   PROTECTION_LEVEL
---------------- -------------------- --------------------
PRIMARY     MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
SQL> show parameter log_archive_dest_2
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2          string   service=db_db01 LGWR ASYNC val
                         id_for=(online_logfiles,primar
                         y_roles) db_unique_name=db01
192.168.1.181
SQL> shutdown immediate
192.168.1.183
SQL> alter database recover managed standby database cancel;
SQL> shutdown immediate
192.168.1.181
SQL> startup mount;
SQL> alter database set standby database to maximize availability;
SQL> alter system set log_archive_dest_2='service=db_db01 LGWR SYNC valid_for=(online_logfiles,primary_roles) db_unique_name=db01' scope=spfile;
192.168.1.183
SQL> startup nomount
SQL> alter database mount standby database;
SQL> alter system set log_archive_dest_2='service=db_orcl LGWR SYNC valid_for=(online_logfiles,primary_roles) db_unique_name=orcl' scope=spfile;
SQL> shutdown immediate
SQL> startup nomount
SQL> alter database mount standby database;
192.168.1.181
SQL> startup
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive_dest_2
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2          string   service=db_db01 LGWR SYNC vali
                         d_for=(online_logfiles,primary
                         _roles) db_unique_name=db01
SQL> select database_role,protection_level,protection_mode from v$database;
DATABASE_ROLE  PROTECTION_LEVEL   PROTECTION_MODE
---------------- -------------------- --------------------
PRIMARY     MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   34
Next log sequence to archive  36
Current log sequence      36
192.168.1.183
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive_dest_2
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2          string   service=db_orcl LGWR SYNC vali
                         d_for=(online_logfiles,primary
                         _roles) db_unique_name=orcl
SQL> select database_role,protection_level,protection_mode from v$database;
DATABASE_ROLE  PROTECTION_LEVEL   PROTECTION_MODE
---------------- -------------------- --------------------
PHYSICAL STANDBY MAXIMUM AVAILABILITY MAXIMUM AVAILABILITY
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_db01
Oldest online log sequence   35
Next log sequence to archive  0
Current log sequence      36
192.168.1.181
SQL> alter system switch logfile;
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   35
Next log sequence to archive  37
Current log sequence      37
192.168.1.183
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_db01
Oldest online log sequence   36
Next log sequence to archive  0
Current log sequence      37

===================================
3 最大高可用--切换到-->最保护能模式
===================================

DG最大保护模式Maximum protection

192.168.1.181
SQL> shutdown immediate
192.168.1.183
SQL> shutdown immediate
192.168.1.181
SQL> alter database set standby database to maximize protection;
SQL> shutdown immediate
192.168.1.183
SQL> startup nomount
SQL> alter database mount standby database;
192.168.1.181
SQL> startup
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive_dest_2
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2          string   service=db_db01 LGWR SYNC vali
                         d_for=(online_logfiles,primary
                         _roles) db_unique_name=db01
SQL> select database_role,protection_level,protection_mode from v$database;
DATABASE_ROLE  PROTECTION_LEVEL   PROTECTION_MODE
---------------- -------------------- --------------------
PRIMARY     MAXIMUM PROTECTION  MAXIMUM PROTECTION
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   37
Next log sequence to archive  39
Current log sequence      39
192.168.1.183
SQL> col dest_name for a25
SQL> select dest_name,status from v$archive_dest_status;
DEST_NAME         STATUS
------------------------- ---------
LOG_ARCHIVE_DEST_1    VALID
LOG_ARCHIVE_DEST_2    VALID
SQL> show parameter log_archive_dest_2
NAME                 TYPE    VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2          string   service=db_db01 LGWR SYNC vali
                         d_for=(online_logfiles,primary
                         _roles) db_unique_name=db01
SQL> select database_role,protection_level,protection_mode from v$database;
DATABASE_ROLE  PROTECTION_LEVEL   PROTECTION_MODE
---------------- -------------------- --------------------
PRIMARY     MAXIMUM PROTECTION  MAXIMUM PROTECTION
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_db01
Oldest online log sequence   37
Next log sequence to archive  0
Current log sequence      39
192.168.1.181
SQL> alter system switch logfile;
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_orcl
Oldest online log sequence   38
Next log sequence to archive  40
Current log sequence      40
192.168.1.183
SQL> archive log list
Database log mode       Archive Mode
Automatic archival       Enabled
Archive destination      /home/oracle/arch_db01
Oldest online log sequence   37
Next log sequence to archive  0
Current log sequence      40

附：Oracle DG管理模式和只读模式相互切换

将standby数据库开启至只读模式(用于primary非常忙时，可以在standby跑一些报表)

$sqlplus “/as sysdba”
SQL>startup mount
SQL>alter database open read only;
[@more@]

将只读模式standby数据库切换至管理模式

$sqlplus “/as sysdba”
SQL>alter database recover managed standby database disconnect from session;

将管理模式的standby数据库切换至只读模式

$sqlplus “/as sysdba”
SQL>alter database recover managed standby database cancel;
SQL>alter database open read only;

以上内容给大家介绍了Oracle dg 三种模式切换的相关知识，希望大家喜欢。

您可能感兴趣的文章:

Oracle使用强制索引的方法与注意事项
这篇文章主要给大家介绍了关于Oracle使用强制索引的方法与注意事项，文中通过示例代码介绍的非常详细，对大家的学习或者工作具有一定的参考学习价值，需要的朋友们下面随着小编来一起学习学习吧。
2017-11-11
oracle+mybatis 使用动态Sql当插入字段不确定的情况下实现批量insert
最近接了一个项目，其中项目需求，有一个非常纠结的问题，由于业务的关系，DB的数据表无法确定，在使用过程中字段可能会增加，这样在insert时给我造成了很大的困扰。接下来，通过本篇文章给大家介绍oracle+mybatis 使用动态Sql当插入字段不确定的情况下实现批量insert
2015-11-11
Oracle数据库启停命令示例
在windos下数据库安装过后,oracle数据库会跟随系统自启动。在linux下需要手动设置oracle启动,下面这篇文章主要给大家介绍了关于Oracle数据库启停命令的相关资料,需要的朋友可以参考下
2023-06-06
Oracle设置密码永不过期的方法
这篇文章主要介绍了Oracle设置密码永不过期的方法,文中通过代码示例介绍的非常详细,对大家使用Oracle设置密码永不过期有一定的帮助,需要的朋友可以参考下
2024-03-03
QT连接Oracle数据库并实现登录验证的操作步骤
这篇文章主要介绍了QT连接Oracle数据库并实现登录验证的操作步骤,本文给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值，需要的朋友可以参考下
2021-01-01
oracle中去掉回车换行空格的方法详解
本篇文章是对oracle中去掉回车换行空格的解决方法进行了详细的分析介绍，需要的朋友参考下
2013-05-05
Oracle数据仓库的分层管理器解决方案开发者网络Oracle
Oracle数据仓库的分层管理器解决方案开发者网络Oracle...
2007-03-03
解析Oracle查询和删除JOB的SQL
本篇文章是对Oracle查询和删除JOB的SQL的实现方法进行了详细的分析介绍，需要的朋友参考下
2013-07-07
Oracle数据库ORA-12560错误问题的解决办法
这篇文章主要介绍了Oracle数据库ORA-12560错误解决办法,本文给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值，需要的朋友可以参考下
2020-05-05
Oracle Index Partition索引分区的注意事项
Oracle索引分区的管理是一个复杂而重要的过程,需要数据库管理员具备丰富的经验和专业知识,通过合理的索引分区策略、定期的维护和优化以及注意事项的遵循,可以确保数据库的性能和稳定性,这篇文章主要介绍了Oracle Index Partition索引分区的管理,需要的朋友可以参考下
2024-08-08

详解Oracle dg 三种模式切换

相关文章

最新评论

大家感兴趣的内容

最近更新的内容

常用在线小工具